Recent questions in ElectroChemistry

0 votes

1 answer 48 views

Calculate the Faraday constant for a half-cell reaction in which the electrode potential is 0.32 V and one mole of electrons are exchanged during the reaction. Express your answer in units of coulombs per mole.

asked Jan 23 in ElectroChemistry by GinaAragon71 (350 points)

0 votes

1 answer 37 views

Calculate the extent of polarization for a cell in which a copper electrode is coupled with a silver electrode at 25°C. The copper electrode has a potential of -0.34 V and the silver electrode has a potential of 0.80 V. The initial concentration of copper ions and silver ions in the solution are 0.001 M and 0.01 M, respectively. The total resistance of the cell (including both the electrolyte and the external circuit) is 10 ohms. Assume that the transfer coefficient for both the copper and silver ions is 0.5, and the Faraday constant is 96,485 C/mol.

asked Jan 23 in ElectroChemistry by EliPicard920 (290 points)

0 votes

1 answer 58 views

Calculate the exchange current density of a copper-copper(II) ion electrode at 25 °C, given that the standard potential of the electrode is +0.34 V versus the standard hydrogen electrode and the transfer coefficient of the electrode reaction is 0.5.

asked Jan 23 in ElectroChemistry by Philip176831 (390 points)

0 votes

1 answer 36 views

Calculate the exchange current density for the redox reaction: Fe2+ + Cr2O72- + 14H+ → 2Fe3+ + 2Cr3+ + 7H2O Given that the standard potential for the reaction at 25°C is 1.33 V, the gas constant is 8.314 J/mol K, and the temperature is 298 K.

asked Jan 23 in ElectroChemistry by DanielleBouc (490 points)

0 votes

1 answer 38 views

Calculate the exchange current density for a Zinc electrode immersed in a solution containing 0.1 M Zinc ions at 25 degrees Celsius, given that the standard potential of the Zinc half-reaction is -0.76 V and the transfer coefficient is 0.5. (Assume concentration polarization effects to be negligible.)

asked Jan 23 in ElectroChemistry by JolieTristan (460 points)

0 votes

1 answer 5 views

Calculate the exchange current density for a zinc electrode immersed in a 1.0 M solution of zinc sulfate at 25°C when the overpotential is 0.05 V. The standard reduction potential for the Zn2+/Zn couple is -0.76 V. The transfer coefficient is 0.5. Assume that the concentration of the electrolyte does not change significantly during the reaction.

asked Jan 23 in ElectroChemistry by SilkeVelasqu (450 points)

0 votes

1 answer 46 views

Calculate the exchange current density for a redox reaction where the standard potential is 0.7 V, and the transfer coefficient is 0.5, given that the rate constant for the reaction is 5 × 10^-7 mol/cm^2*s.

asked Jan 23 in ElectroChemistry by BernadetteFi (390 points)

0 votes

1 answer 54 views

Calculate the exchange current density for a metal electrode immersed in a 1 M solution of its corresponding ions. The standard rate constant for the reaction is 6.3 x 10^-5 cm/s and the concentration of the electrons in the electrode is 5 x 10^23 atoms/cm^3. Additionally, assume the temperature is 25°C and the Faraday constant is 96,500 C/mol.

asked Jan 23 in ElectroChemistry by TabathaTedbu (510 points)

0 votes

1 answer 9 views

Calculate the exchange current density at the interface between a silver electrode and an aqueous solution of silver ions, given that the standard reduction potential for the Ag+/Ag half-cell is +0.80 V, the concentration of Ag+ in the solution is 0.025 M, and the temperature is 25°C.

asked Jan 23 in ElectroChemistry by MirandaJephc (410 points)

0 votes

1 answer 50 views

Calculate the exchange current density at the cathode of a lithium-ion battery if the temperature of the battery is 25 °C, the standard potential of

asked Jan 23 in ElectroChemistry by YongSheehy6 (350 points)

0 votes

1 answer 45 views

Calculate the equilibrium constant, K, for the electrochemical reaction below, given the standard reduction potentials at 298 K:2 H+ (aq) + 2 e- → H2 (g) E° = 0.00 VFe3+ (aq) + e- → Fe2+ (aq) E° = +0.771 V

asked Jan 23 in ElectroChemistry by BennyFreycin (390 points)

0 votes

1 answer 56 views

Calculate the equilibrium constant for the reaction that occurs when a copper electrode is placed in a solution of 0.1 M copper(II) sulfate and connected to a standard hydrogen electrode. The cell potential at standard conditions is observed to be 0.34 V. (Hint: Use the Nernst equation to relate the cell potential to the equilibrium constant.)

asked Jan 23 in ElectroChemistry by VeolaV562629 (550 points)

0 votes

1 answer 51 views

Calculate the equilibrium constant for the following electrochemical reaction at a temperature of 25°C:$$\ce{Co^{2+} + 2e^- <=> Co(s)}$$Given that the standard reduction potential for the half-reaction is $-0.28\,\text{V}$ and the concentration of $\ce{Co^{2+}}$ is $0.1\,\text{M}$.

asked Jan 23 in ElectroChemistry by JerryFindlay (490 points)

0 votes

1 answer 55 views

Calculate the equilibrium constant for the following electrochemical reaction at 298K:$$\ce{2Fe^3+ (aq) + 2I^- (aq) -> 2Fe^2+ (aq) + I2 (s)}$$ Given: Standard reduction potentials: $\ce{Fe^3+ + e^- -> Fe^2+}$ Eº = +0.77V $\ce{2I^- -> I2 + 2e^- }$ Eº = +0.54V

asked Jan 23 in ElectroChemistry by MackBeckham (450 points)

0 votes

1 answer 42 views

Calculate the equilibrium constant for the following electrochemical cell reaction at 25°C:Cu(s) + 2 Ag+(aq) --> Cu2+(aq) + 2 Ag(s)Given the standard reduction potentials are:Cu2+(aq) + 2 e- → Cu(s) E°red = +0.34 VAg+(aq) + 1 e- → Ag(s) E°red = +0.80 V

asked Jan 23 in ElectroChemistry by MarleneEllis (530 points)

0 votes

1 answer 51 views

Calculate the equilibrium constant for the electrochemical reaction: Zn(s) + 2H^+(aq) → Zn^2+(aq) + H2(g) when the concentration of Zn^2+ is 0.25 M, [H^+] is 2.5 × 10^-3 M, and the pressure of H2 is 0.8 atm at 298 K.

asked Jan 23 in ElectroChemistry by ElizaMalley3 (490 points)

0 votes

1 answer 47 views

Calculate the equilibrium constant for the electrochemical cell reaction given below, if the standard reduction potential for the reduction of Fe3+ ion is -0.771 V and for the reduction of Ag+ ion is +0.799 V. Fe3+ + 3e- → Fe (s) E° = -0.771 VAg+ + e- → Ag (s) E° = +0.799 V

asked Jan 23 in ElectroChemistry by BXQWarren060 (530 points)

0 votes

1 answer 44 views

Calculate the equilibrium constant (K) of the electrochemical reaction below at 298K:Fe(s) + Cu2+(aq) ⇌ Fe2+(aq) + Cu(s) Given that at standard state (1 atm and 298K) the standard reduction potentials of Fe2+(aq)/Fe(s) and Cu2+(aq)/Cu(s) are -0.44 V and +0.34 V, respectively.

asked Jan 23 in ElectroChemistry by SkyeVillasen (610 points)

0 votes

1 answer 40 views

Calculate the equilibrium constant (K) of the electrochemical reaction below at 25°C: 2AgCl(s) + H2(g) <--> 2Ag(s) + 2HCl(aq) Given: E°AgCl/Ag = 0.22 V E°HCl/H2 = 0.00 V Kw = 1.0 x 10^-14 at 25°C Standard Hydrogen Electrode (SHE) has E° = 0.00 V

asked Jan 23 in ElectroChemistry by StefanieWhip (350 points)

0 votes

1 answer 50 views

Calculate the equilibrium constant (K) for the reaction that occurs when a nickel electrode is placed in a solution containing 1.0 M of nickel ions and 1.0 M of copper ions. The nickel electrode was placed in the solution, and the cell potential was measured to be 0.21 V at 25 °C.

asked Jan 23 in ElectroChemistry by JerrodLeidig (190 points)

Categories