Recent questions in Chemical engineering

0 votes

1 answer 5 views

How can a chemical engineer develop a process for the production of 1 ton of sulfuric acid with a concentration of 98% at a desired temperature and pressure using a specific raw material feedstock and considering the economic feasibility of the process?

asked 1 day ago in Chemical engineering by EzraHudgins6 (410 points)

0 votes

1 answer 28 views

How can a chemical engineer develop a cost-effective process for the production of 1 ton of ethylene glycol using a fixed-bed catalytic reactor?

asked 1 day ago in Chemical engineering by VerlaBoard7 (590 points)

0 votes

1 answer 4 views

Here's a precise problem for a chemistry student to solve related to designing a heat exchanger for a specific process:A chemical plant produces a product with a flow rate of 500 liters per hour, and it needs to be cooled from its initial temperature of 120°C to its final temperature of 80°C before it can be packaged for shipment. The cooling medium that will be used is water, which is available at a flow rate of 400 liters per hour and an initial temperature of 20°C. Design a heat exchanger to cool the product and determine the required surface area of the heat exchanger if the overall heat transfer coefficient is 500 W/m2K.

asked 1 day ago in Chemical engineering by LXKVilma3586 (450 points)

0 votes

1 answer 5 views

Given a mixture of benzene and toluene, with a mole fraction of 0.6 and 0.4 respectively, design a distillation column with a reflux ratio of 2.5 to achieve a product purity of at least 99% for both components.

asked 1 day ago in Chemical engineering by TraceyBly383 (630 points)

0 votes

1 answer 28 views

Develop a process for the synthesis and purification of aspirin from salicylic acid, highlighting the key reaction steps and techniques used to obtain a high purity product.

asked 1 day ago in Chemical engineering by DarbyManske (570 points)

0 votes

1 answer 33 views

Develop a process for the purification of caffeine from tea leaves using solvent extraction technique. Provide a detailed explanation of the steps involved in the process and the criteria that will determine the efficiency of the procedure.

asked 1 day ago in Chemical engineering by WernerDillar (430 points)

0 votes

1 answer 30 views

Develop a design for a system that effectively treats the wastewater produced by a textile factory, addressing the removal of coloring agents, heavy metals, and other hazardous contaminants.

asked 1 day ago in Chemical engineering by LeannaVance (470 points)

0 votes

1 answer 43 views

Design a treatment system for the removal of heavy metals from industrial wastewater using an ion exchange process for a chemical manufacturing plant operating in the city with strict regulations regarding the disposal of wastewater.

asked 1 day ago in Chemical engineering by ShennaNolan4 (420 points)

0 votes

1 answer 20 views

Design a system for the safe storage and transportation of hydrochloric acid with a concentration of 37%. Include calculations for the required storage tank size, appropriate materials for construction, necessary safety features, and transportation methods.

asked 1 day ago in Chemical engineering by DelilaPike1 (270 points)

0 votes

1 answer 5 views

Design a system for the safe storage and transportation of highly concentrated sulfuric acid, considering factors such as material compatibility, environmental impact, and spill prevention.

asked 1 day ago in Chemical engineering by MoseCharteri (470 points)

0 votes

1 answer 33 views

Design a system for the safe storage and transportation of 1000 liters of hydrochloric acid, taking into account factors such as temperature and pressure control, compatibility with the storage container and transportation vehicle, and emergency response measures in case of spills or leaks.

asked 1 day ago in Chemical engineering by ManualSweene (560 points)

0 votes

1 answer 28 views

Design a system for the production of lubricants in a chemical plant that can produce at least 1000 liters of lubricant per day. The system should also ensure the quality and consistency of the final product and take into account the use of sustainable and environmentally friendly materials and processes.

asked 1 day ago in Chemical engineering by SoilaRicker (490 points)

0 votes

1 answer 26 views

Design a system for the efficient production of hydrogen fuel using renewable energy sources. Consider factors such as cost, environmental impact, and scalability. Determine the optimal method for producing and storing hydrogen fuel, and provide a detailed design for the system. Your solution should also include calculations for the efficiency and potential output of the system.

asked 1 day ago in Chemical engineering by MittieBes365 (690 points)

0 votes

1 answer 5 views

Design a storage and transportation system for the safe handling of hydrochloric acid, a hazardous chemical commonly used in the chemical industry. Your system should include all the necessary equipment, materials, and procedures, and should be in compliance with regulatory standards for the storage and transportation of hazardous chemicals. Additionally, address any potential risks or hazards associated with the storage and transportation of the chemical and explain how these risks will be mitigated.

asked 1 day ago in Chemical engineering by AnyaThayer34 (370 points)

0 votes

1 answer 26 views

Design a process for the purification of crude caffeine extracted from coffee beans, using available techniques and equipment at your disposal, while ensuring high purity and minimum loss of product.

asked 1 day ago in Chemical engineering by ZandraClemmo (830 points)

0 votes

1 answer 17 views

Design a process for the purification of crude acetone obtained from the industrial production of phenol to obtain at least 99% pure acetone. Take into account the initial impurities in the crude acetone and suggest suitable separation techniques to remove them. Specify the equipment and operating conditions required for your proposed purification process.

asked 1 day ago in Chemical engineering by DaneSchauer (650 points)

0 votes

1 answer 4 views

Design a process for the purification of a sample of crude oil. Describe the steps and the equipment needed for the process. Also, provide a brief explanation of the principles behind each step.

asked 1 day ago in Chemical engineering by ValenciaCkw (390 points)

0 votes

1 answer 24 views

Design a process for the purification of 500 grams of crude aspirin containing impurities such as acetic acid and sulfuric acid. The final product must have a purity of at least 99.5%. Describe the steps involved in the purification process, including the necessary equipment, reagents, and conditions for each step. Also, calculate the percent yield of the final product based on the initial mass of crude aspirin.

asked 1 day ago in Chemical engineering by DallasMerrim (530 points)

0 votes

1 answer 26 views

Design a process for the production of urea-based fertilizer starting from ammonia and carbon dioxide gas feedstocks. Determine the optimal operating conditions, including temperature, pressure, and reactor design specifications, to achieve maximum conversion and yield of the desired product. Also, identify and address any potential environmental impacts that may result from the production process.

asked 1 day ago in Chemical engineering by SolCamarillo (470 points)

0 votes

1 answer 36 views

Design a process for the production of a biodegradable detergent that is effective in removing stains from clothes and is environmentally friendly, using renewable resources for its production. The process should take into account the cost-effectiveness, safety, and quality of the final product.

asked 1 day ago in Chemical engineering by NorrisWoffor (630 points)

Page:

« prev
1
2
3
4
5
6
7
next »

Recent questions in Chemical engineering

Recent questions in Chemical engineering

Categories