Recent questions without a selected answer

0 votes

1 answer 30 views

Design a heat exchanger for a chemical plant which produces 1000 kg/hr of a chemical at a temperature of 350°C. The chemical needs to be cooled down to 50°C using water at an inlet temperature of 25°C. The cooling water flow rate should not exceed 5000 kg/hr. The overall heat transfer coefficient should be at least 500 W/m2K. Determine the surface area of the heat exchanger required for this process.

asked Feb 4 in Chemical engineering by ShayneWooden (450 points)

0 votes

1 answer 39 views

Design a drug that could potentially treat Type 2 Diabetes by targeting an enzyme or transport protein involved in glucose metabolism. Consider the pharmacokinetics and pharmacodynamics of the drug and include a detailed mechanism of action.

asked Feb 4 in Medicinal Chemistry by AureliaWorsh (570 points)

0 votes

1 answer 41 views

Design a drug that can selectively target and inhibit the activity of the enzyme responsible for converting saturated fatty acids to mono-unsaturated fatty acids in the liver, without affecting the activity of other important enzymes involved in lipid metabolism pathways. How would you potentially test the efficacy of this drug in vivo?

asked Feb 4 in BioChemistry by DannyGrove01 (730 points)

0 votes

1 answer 44 views

Design a distillation column to separate a mixture that contains 40% ethanol and 60% water by weight with a desired ethanol purity of 95%. The feed rate of the mixture is 100 kg/hr and the reflux ratio is 3:1. Determine the number of theoretical plates required and the height of the column. Assume that the total condenser and reboiler are both at 100°C and that the distillate leaving the column is 90% liquid and 10% vapor.

asked Feb 4 in Chemical engineering by VickieDevito (470 points)

0 votes

1 answer 47 views

Design a distillation column to separate a mixture of ethanol and water. The feed stream contains 20 mol% ethanol and the desired distillate should contain at least 95 mol% ethanol. The reflux ratio should be 3:1 and the column should have 25 theoretical trays. Determine the composition of the distillate, bottoms, and the optimal feed tray location to achieve the desired separation. Use McCabe-Thiele method to determine the number of theoretical trays required.

asked Feb 4 in Chemical engineering by TysonMacnama (390 points)

0 votes

1 answer 48 views

Design a distillation column to separate a mixture of ethanol and water with an initial composition of 40% ethanol and 60% water. The column should achieve a separation of at least 95% ethanol in the distillate product. The available packing materials are Pall rings with a diameter of 1.5 inches and a height of 2 inches. The column inlet flow rate is 1000 kg/hr with a pressure of 1 atm and a temperature of 80°C. The column should have 25 theoretical plates and operate at reflux ratios ranging from 1.5 to 3.0. Additionally, the column diameter should not exceed 3 feet. Provide the design calculations and specifications for the distillation column.

asked Feb 4 in Chemical engineering by Ricky90G1549 (350 points)

0 votes

1 answer 44 views

Design a distillation column to separate a mixture of ethanol and water when the initial mixture contains 30% ethanol and 70% water. The desired final concentration of ethanol in the distilled product is 95%. The distillation column is 14 trays high and the reflux ratio is set at 2.2. Calculate the minimum number of theoretical trays required in the distillation column and provide the final composition of the ehtanol product stream.

asked Feb 4 in Chemical engineering by RigobertoWoo (290 points)

0 votes

1 answer 43 views

Design a distillation column to separate a mixture of ethanol and water using McCabe-Thiele Method. The feed contains 50 mol% ethanol and the distillate should have a purity of at least 95 mol% ethanol. The reflux ratio is 2.5 and the boil-up ratio is 1.5. The column must have 10 theoretical plates. Determine the number of trays above the feed and below the feed and the corresponding compositions of the distillate and bottoms.

asked Feb 4 in Chemical engineering by ElkeJoris284 (190 points)

0 votes

1 answer 35 views

Design a distillation column to separate a mixture of cyclohexane and toluene with a feed composition of 60 mol% cyclohexane and 40 mol% toluene. The distillate product should contain a minimum of 90 mol% cyclohexane and the bottom product should contain a maximum of 10 mol% cyclohexane. You have access to a temperature range of 80-150°C and a pressure range of 1-5 atm. Determine the number of theoretical plates required for this separation and the corresponding reflux ratio.

asked Feb 4 in Chemical engineering by HumbertoA803 (670 points)

0 votes

1 answer 40 views

Design a distillation column to separate a mixture of acetone and water containing 35% (by mole) acetone with a feed rate of 1000 kg/hr. The desired purity of the overhead product is 99% acetone, and the bottom product should contain no more than 0.5% acetone. The available reflux ratio is 2.5, and the feed is at its boiling point at normal atmospheric pressure. Determine the number of theoretical trays required, the optimum feed tray location, and the reflux and boilup rates needed for the design.

asked Feb 4 in Chemical engineering by FranklynWhx6 (330 points)

0 votes

1 answer 42 views

Design a distillation column that separates a mixture of ethanol and water with a 95% ethanol purity and a production rate of 1000 liters per hour. The mixture contains 50% ethanol and 50% water by volume. The distillation column should operate at a pressure of 1 atm and a temperature range of 78-85°C. Assume that the feed enters the column as a saturated liquid and that the overhead product is 90% ethanol, while the bottom product is 5% ethanol. Determine the number of stages required and the reflux ratio for this system.

asked Feb 3 in Chemical engineering by KristalBoldt (490 points)

0 votes

1 answer 37 views

Design a distillation column that separates a mixture of benzene and toluene with a feed of 50 mol% benzene and 50 mol% toluene, into two product streams: one with a purity of 99% benzene and the other with a purity of 99% toluene. The total distillate flow rate should be 80% of the feed flow rate and the reflux ratio should be 1.5 times the minimum reflux ratio. Provide a complete design including the required stages, the reboiler duty, and the reflux flow rate.

asked Feb 3 in Chemical engineering by DarcyMast013 (530 points)

0 votes

1 answer 30 views

Design a distillation column that can separate a mixture consisting of 40% acetone, 30% methanol, and 30% ethanol with a feed rate of 100 mol/h. The distillate should consist of at least 98% acetone, and the bottom product should contain no more than 1% acetone. You may assume that the column operates at a constant pressure and has 20 equilibrium stages. Determine the reflux ratio and the number of trays required to achieve this separation.

asked Feb 3 in Chemical engineering by Ava689391264 (510 points)

0 votes

1 answer 47 views

Design a distillation column that can effectively separate a mixture of ethanol and water with a composition of 60% ethanol and 40% water. The distillation column should have a reflux ratio of 1.5 and a total of 10 theoretical stages. Determine the operating conditions (temperature, pressure, and feed rate) needed to achieve a distillate product with a composition of 95% ethanol and a bottoms product with a composition of 5% ethanol.

asked Feb 3 in Chemical engineering by DixieBeadle (330 points)

0 votes

1 answer 38 views

Design a distillation column that can effectively separate a mixture of 75% ethanol and 25% water with a feed rate of 1000 kg/hr. Your column should produce a distillate with a composition of at least 95% ethanol and a bottom product with no more than 5% ethanol. Assume the feed mixture enters the column at its boiling point and you have access to a cooling water supply at 20°C for the condenser. Provide a detailed design and justification of your column's operating conditions including temperatures, pressures, and flow rates.

asked Feb 3 in Chemical engineering by EmmettAllred (490 points)

0 votes

1 answer 49 views

Design a distillation column that can effectively separate a mixture containing 50 wt% methanol and 50 wt% water. The column should produce a distillate with no more than 5 wt% methanol and a bottom product with no more than 2 wt% water. The feed rate is 1000 kg/h and the column must operate at atmospheric pressure. Assume that the feed is a saturated liquid and that the methanol-water mixture behaves as an ideal solution. Provide the design specifications for the column, including the number of trays or packing height, diameter, and other necessary specifications.

asked Feb 3 in Chemical engineering by BeatriceM938 (270 points)

0 votes

1 answer 41 views

Design a distillation column for the separation of a mixture containing 35% Ethanol and 65% Water. Calculate the number of theoretical plates required for the separation if the column operates at a pressure of 1 atm and a reflux ratio of 1.5.

asked Feb 3 in Chemical engineering by EnriquetaPat (270 points)

0 votes

1 answer 29 views

Design a distillation column for the separation of a mixture composed of 50% ethanol and 50% water. The column must produce a distillate that is at least 95% ethanol and a bottoms stream that is at most 5% ethanol. The feed rate is 1000 kg/h and the reflux ratio is to be determined by the student. Provide the complete design of the distillation column including the number of theoretical trays, feed tray location, and the diameter of the column.

asked Feb 3 in Chemical engineering by TamSennitt9 (390 points)

0 votes

1 answer 31 views

Design a distillation column for the separation of a binary mixture of ethanol and water, with a feed consisting of 50 weight percent ethanol and 50 weight percent water. The column should be able to produce a distillate product containing at least 90 weight percent ethanol, with a recovery of at least 95 weight percent of the ethanol in the feed. The feed rate is 1000 kg/hr and the reflux ratio should be optimized for the best separation efficiency. Determine the number of theoretical trays required for the column design and calculate the heat load required for the operation of the column.

asked Feb 3 in Chemical engineering by EdgardoLiebe (510 points)

0 votes

1 answer 53 views

Design a distillation column for the separation of a binary mixture consisting of ethanol and water. The feed mixture contains 40 mol% ethanol and 60 mol% water, and the desired product purity is 95 mol% ethanol. The feed rate is 1000 kg/hr and the column should operate at atmospheric pressure. Calculate the number of theoretical plates required to achieve the desired separation and determine the corresponding height and diameter of the column.

asked Feb 3 in Chemical engineering by BAHLorenza82 (290 points)

Page:

« prev
1
...
192
193
194
195
196
197
198
199
200
...
1000
...
next »

Recent questions without a selected answer

Categories