Hot questions

0 votes

1 answer 50 views

Calculate the corrosion current density for a zinc-copper galvanic couple, with a surface area of 10 cm² each, immersed in a 0.1 M copper sulfate solution and a 0.1 M zinc sulfate solution, respectively. Given that the exchange current density for the zinc and copper electrodes are 0.0035 A/cm² and 0.1184 A/cm², respectively, What will be the corrosion rate for the zinc electrode in micrometers per year?

asked Jan 23 in ElectroChemistry by SherrylP401 (2.4k points)

0 votes

1 answer 50 views

Calculate the change in Gibbs free energy for the reaction between hydrogen gas and iodine gas that forms hydrogen iodide gas. The balanced equation is as follows:H2(g) + I2(g) → 2HI(g)Assume a temperature of 298 K and use the following standard molar free energy of formation values:∆Gf° (HI) = -17.4 kJ/mol∆Gf° (H2) = 0 kJ/mol∆Gf° (I2) = 0 kJ/mol

asked Jan 23 in Chemical thermodynamics by AundreaWhitf (1.8k points)

0 votes

1 answer 52 views

Calculate the amount of ozone depletion caused by the release of 1000 metric tons of chlorofluorocarbons (CFCs) into the atmosphere and explain the impact it can have on the atmosphere in terms of UV radiation and human health.

asked Jan 23 in Environmental Chemistry by Fawn72203404 (2.2k points)

0 votes

1 answer 53 views

Calculate the amount of heat required to melt 50 grams of ice at 0°C, given that the enthalpy of fusion of ice is 6.01 kJ/mol.

asked Jan 23 in ThermoChemistry by FelixTolmer3 (1.9k points)

0 votes

1 answer 90 views

A chemistry student needs to determine the concentration of NaOH in a 250 mL solution. They know that 10 mL of the solution was titrated with 0.1 M HCl solution, which required 8.5 mL of the HCl solution to be fully neutralized. Based on this information, what is the concentration of NaOH in the solution?

asked Jan 22 in Analytical Chemistry by Lachlan74F5 (2.0k points)

0 votes

1 answer 50 views

Calculate the change in entropy (ΔS) for the reaction in which 3 moles of carbon monoxide (CO) gas is burned with excess oxygen gas to form 3 moles of carbon dioxide (CO2) gas. The reaction is carried out at constant pressure and a temperature of 298 K.

asked Jan 23 in Inorganic Chemistry by QJXClarice2 (2.5k points)

0 votes

1 answer 49 views

Calculate the corrosion rate of an iron rod with a surface area of 20 cm² that is connected to a copper plate with a surface area of 25 cm², immersed in a solution of 0.5 M copper sulfate, given that the measured current is 0.2 A.

asked Jan 23 in ElectroChemistry by DebFannin623 (1.8k points)

0 votes

1 answer 48 views

Calculate the enthalpy change for the combustion of methane gas if the standard enthalpies of formation of CH4(g) and H2O(l) are -74.8 kJ/mol and -285.8 kJ/mol, respectively.

asked Jan 23 in Chemical thermodynamics by TarenSalmond (1.8k points)

0 votes

1 answer 82 views

A student mixed 25.0 grams of sodium hydroxide with excess hydrochloric acid. If the theoretical yield of sodium chloride is 34.0 grams, what is the percent yield of the reaction?

asked Jan 22 in Chemical reactions by JonasQuj2910 (2.1k points)

0 votes

1 answer 53 views

Calculate the amount of heat absorbed or released when 50 grams of NaCl crystals at 25°C are dissolved in 200 grams of water at the same temperature. Given the enthalpy of crystallization of NaCl is -787 kJ/mol and the specific heat capacity of water is 4.18 J/g°C.

asked Jan 23 in ThermoChemistry by YVMCinda4278 (2.3k points)

0 votes

1 answer 90 views

A chemistry student needs to calculate the equilibrium constant (Kc) for the reaction below at a certain temperature: N2(g) + 3H2(g) ⇌ 2NH3(g)Given the initial concentrations of N2, H2, and NH3 are 0.25 M, 0.1 M, and 0.1 M respectively, what is the value of Kc for this reaction at the given temperature?

asked Jan 22 in Chemical equilibrium by LeeAlder0448 (1.5k points)

0 votes

1 answer 46 views

Calculate the enthalpy change for the complete oxidation of 12.5 g of methane gas assuming that all the heat evolved is used to heat up 150 g of water from 25°C to 35°C. The enthalpy of formation of CH4(g) and H2O(l) are -74.8 kJ/mol and -285.8 kJ/mol, respectively.

asked Jan 23 in ThermoChemistry by KennyWenz603 (1.7k points)

0 votes

1 answer 51 views

Calculate the bond dissociation energy for the H-H bond, given that the average H-H bond energy is 436 kJ/mol. Show all the steps in your calculation.

asked Jan 23 in Chemical bonding by PatsyRubin2 (2.2k points)

0 votes

1 answer 96 views

A bottle contains a mixture of nitrogen and oxygen gases. At a specific temperature and pressure, the nitrogen molecules move on an average velocity of 500 m/s and oxygen molecules move at 400 m/s. What is the partial pressure of nitrogen and oxygen in the mixture if the total pressure of the gas is 1 atm?

asked Jan 22 in Physical Chemistry by VickieDuffie (1.8k points)

0 votes

1 answer 121 views

What is the pH of a solution prepared by mixing 25 mL of 0.1 M hydrochloric acid (HCl) with 50 mL of 0.05 M sodium hydroxide (NaOH)?

asked Jan 21 in Inorganic Chemistry by AgnesXyg5256 (2.0k points)

0 votes

1 answer 49 views

Calculate the corrosion potential of a copper metal electrode in a solution containing 0.1M CuSO4 and 0.5M H2SO4 at 298K, given that the standard electrode potential of the Cu2+/Cu electrode is +0.34V and a hydrogen electrode is used as the reference electrode.

asked Jan 23 in ElectroChemistry by GreggTimperl (2.4k points)

0 votes

1 answer 85 views

A chemistry student wants to perform a reaction that produces carbon dioxide gas. If the student has 500 grams of calcium carbonate and an excess of hydrochloric acid, how many liters of carbon dioxide gas can be produced at Standard Temperature and Pressure (STP)? (Assume the reaction goes to completion)

asked Jan 22 in Chemical reactions by LarhondaKeel (1.6k points)

0 votes

1 answer 53 views

Calculate the activation energy for the following electrochemical reaction: 2H₂O(l) → O₂(g) + 4H⁺(aq) + 4e⁻ if the half-cell potentials are: E°(O₂/H₂O) = 1.23 V E°(H⁺/H₂) = 0 V Assuming the reaction follows Arrhenius equation, where the rate constant k is related to the activation energy Ea, temperature T and pre-exponential factor A by: k = A exp(-Ea/RT) where R is the gas constant equal to 8.314 J/molK.

asked Jan 23 in ElectroChemistry by ShaunBehan45 (2.8k points)

0 votes

1 answer 48 views

Calculate the energy required to break a carbon-carbon single bond (C-C) with a bond length of 1.54 Å using the average bond-dissociation energy of 347 kJ/mol for this type of bond.

asked Jan 23 in Chemical reactions by ElidaHaskins (1.7k points)

0 votes

1 answer 52 views

Calculate the amount of heat required to melt 50 grams of ice at 0°C and convert it into liquid water at the same temperature. The enthalpy of fusion of ice is 6.01 kJ/mol.

asked Jan 23 in ThermoChemistry by LeathaOchoa (1.7k points)

Categories